Imagine this! You have put your Apple Watch on the charging dock, and you are waiting for a fully charged notification to start your day. But afterward, it’s still at 0%. Frustrating, right? Is it a glitch, a wrong connection, or something? Whatever it is, it can completely throw off your entire day if your apple watch not charging properly. But before you head off to the Apple Store, take a deep breath!
Most charging problems are simpler to repair than you may believe. In this blog, we will guide you through the procedures to make your Apple Watch charge once again, and continue to use its features uninterrupted. Let’s get started with these quick repairs and revive your watch!
Common Reasons for Apple Watch Not Charging
Let’s first explore why your Apple Watch is not charging. There are a few common causes:
=> Faulty Charging Cable or Adapter
The primary issue is the charging cable itself. If it’s damaged or worn out, it can stop proper charging.
=> Dirty or Misaligned Charging Port
Sometimes, Dust, dirt, or debris might get stuck in the charging port. It stops the charger from making a good connection.
=> Software Glitches
Is your Apple Watch not charging well? It may be due to a software glitch. A software glitch or an outdated version of the software may be stopping the watch from charging.
=> Hardware Problems
In some cases, there may be a hardware issue with your Apple Watch, like a faulty charging system within the device.
=> Power Source Issues
A faulty wall outlet or USB port can be the reason why your Apple Watch is not charging.
Quick Solutions to Apple Watch Not Charging
Below are the step-by-step procedures to troubleshoot and fix the problem.
=> 1. Check the Charging Cable and Adapter
The first thing to do to solve the charging problem is checking your charging cable and adapter are functioning well. Over time, charging cables can be too damaged or lose their power. Check the cable for signs of fraying or for exposed wire.
If you have another charger, use it. If the Apple Watch charges when you try a different charger, then that means there is a problem with the original cable or adapter.
Tip: Use original Apple charging cables to avoid compatibility issues. Third-party chargers may not work if used.
=> 2. Clean the Charging Port and Watch Back
Dust and debris normally will settle quite readily on the charging port of your Apple Watch or in the back of the device where charging contacts meet. If dirt is used to clog the connection, your Apple Watch will not charge properly.
To clean it –
- Use a soft, dry cloth to wipe off both the back of your Apple Watch and the charging pad.
- You can remove any dust and dirt with a soft brush or compressed air in the charging port.
- Cleaning has to be done with care to avoid damaging any sensitive parts.
=> 3. Inspect the Power Source
The power source is another issue when your Apple Watch fails to charge. First, check if the wall outlet is functional. Check it by putting in another device or using another outlet. If you’re charging via a USB port on your computer, charge it directly into a wall outlet. Your Apple Watch might not get the power it needs from some USB ports to charge successfully.
Tip: Apple recommends charging with an approved Apple wall adapter for optimal charging.
=> 4. Restart Your Apple Watch
At times, software also create problems with charging. A restart will easily correct those problems. How to restart your Apple Watch:
- Keep pressing the side button until the power off slider displays.
- Slide to power off, and wait for the watch to shut down.
- Wait roughly 30 seconds, then press and hold the side button to power it back up.
When your Apple Watch has rebooted, try charging it again. If there is a software problem, restarting your device should fix the issue.
=> 5. Update Your Apple Watch Software
In rare cases, an older version of watches might cause charging difficulties. To confirm if there are software updates:
- Open the Watch app on your iPhone.
- Select General > Software Update.
- Download and install it if an update is available.
Make sure your Apple Watch is properly charged and that there is adequate battery life to get through the updating process.
=> 6. Reset Your Apple Watch
If none of these resolve the issue, you may be required to reset your Apple Watch. Resetting deletes everything, so ensure that you’ve backed up your watch prior.
How to reset your Apple Watch –
- Navigate to Settings > General > Reset.
- Press Erase All Content and Settings.
- Go ahead and follow the on-screen instructions to make the reset happen.
- After this, reset your Apple Watch again and try charging it.
=> 7. Try a Different Charging Pad
If you are charging off of a wireless charging pad, the charging pad might be damaged. To check for this:
- Test with a new wireless charging pad or dock to see if there is an issue with the pad.
- If you have a second Apple Watch charger, you can use that with your watch.
Some people have found success with certain charging pads. So, it’s worth trying a different charging pad.
=> 8. Hardware Problems
If none of the above tips work, then the problem is with the hardware in your Apple Watch. There may be a problem with the battery or charging coil.
Tip: If your watch is still under warranty, contact Apple Support. Third-party repair shops might prove to be useful for out-of-warranty devices.
=> 9. Contact Apple Support
If the above steps do not work, you should contact Apple Support. They can walk you through further troubleshooting and, if necessary, through repair or replacement.
Also Read – How to Charge Apple Pencil?
Final Thoughts
If your Apple Watch not charging well, in most cases, it is a simple problem such as a faulty charging cable, clogged charging port, or software bug. You can quickly solve the problem and make your device work again within minutes with these steps. Recheck your charger, clean your device, and plug them in correctly. Your Apple Watch will be charged in the blink of an eye with these tricks. If these fail, don’t hesitate to restart your Apple Watch or contact Apple Support for help.
