You are listening to your favorite song but suddenly you find one AirPod not working. If the left AirPod is not working, it is frustrating when you rely on your AirPods for clear audio and continuous connectivity.
Struggling with this issue? You are not alone. Many users face the same problem but the good news is that there are several simple steps you can take to troubleshoot and fix the issue. Let’s explore how to fix this issue and get your AirPods working perfectly again.
1. Check Charging and Battery Levels
When one AirPod is not working, the issue could simply be that it hasn’t been charged properly. Your AirPods need to have sufficient battery life to function, so check the battery levels.
Steps to Check Charging
- The charging case is essential for keeping your AirPods powered, so ensure they are charged fully. Place your AirPods in the case and let them charge for about 30 seconds.
- Open the charging case near your iPhone or iPad to check the battery levels of the case and the AirPods. You should see an indicator for each AirPod and the case. If one AirPod shows no charge or a very low charge, it might cause an issue.
- After confirming the charging status, place the malfunctioning AirPod back in the case while the other is still inside. Close the lid and give it a few seconds before opening it again to test.
- Once both AirPods have been charging for a while, test the malfunctioning AirPod again to see if it starts working. If the left AirPod not working, try this step to see if the issue is simply a power-related one.
If your left AirPod is not working after charging, the issue might not be related to the battery and further troubleshooting will be needed.
2. Reset Your AirPods
If charging didn’t resolve the issue, resetting your AirPods is another great solution. This can help if there is a software glitch or a problem with the connection between your AirPods and the paired device.
Steps to Reset AirPods
- Open your iPhone or iPad’s Bluetooth settings, find your AirPods and tap Forget this device.
- Keep your AirPods in their case and then open. Press and hold the setup button on the back of the charging case until you see the light flash amber and then white.
- After resetting, reconnect your AirPods by opening the case near your iPhone or iPad. The pairing process should begin and once connected, test the AirPods to see if both are working properly.
If one AirPod not working, resetting them might solve the problem if the issue is related to the connection or settings on your device.
3. Inspect for Debris or Dirt
Sometimes, dirt can accumulate in the speaker mesh or microphone of the AirPods, causing sound issues. If your right AirPod not working, cleaning them thoroughly might help.
Cleaning Tips
- Inspect the speaker and microphone mesh of both AirPods. Look for any dust, earwax or other waste that could be blocking the sound.
- Use a soft, dry cloth or a cotton swab to clean the AirPods gently. You can also use a soft-bristled brush to remove any dirt from the mesh. Be careful not to push waste into the AirPod.
- For a deeper clean, you can use compressed air to blow out any stubborn waste from the mesh. Ensure you are holding the AirPod at an angle to avoid pushing the waste inside.
Cleaning your AirPods regularly can prevent audio issues if dirt is blocking the sound. After cleaning, test the AirPods again to see if the problem persists.
4. Check the Audio Balance Settings
If you find the sound from your AirPod, it is possible that the audio balance is set incorrectly.
Adjust Audio/Visual Settings
- Settings > Accessibility > Audio/Visual.
- Under the Balance section, ensure the balance slider is set in the middle. If it is shifted to one side, it may cause one AirPod to play sound louder than the other.
Adjusting the balance settings can resolve cases where one AirPod not working properly due to incorrect settings. After that, you have to check if both AirPods are working as expected.
5. Update Firmware
Software or firmware bugs can sometimes affect your AirPod’s performance. Keeping it updated ensures they have latest fixes and improvements.
Update AirPods Firmware
- Connect your AirPods to your phone.
- Ensure your device is connected to Wi-Fi and the AirPods are in the charging case.
- You have to check your AirPod’s version.
Updating it can resolve bugs that might be causing the AirPod not to be working. Once the update is complete, test your AirPods again.
6. Test with Another Device
If you have tried all the above steps and the issue persists, there may be a problem with the device you are connecting to. Try pairing your AirPods with another Bluetooth device.
If your right AirPod not working on one device but works fine on another, this could suggest a problem with the Bluetooth settings. Reconnecting your AirPods might solve the issue.
Read Also – iPhone Not Charging
7. Contact Apple Support
If none of these steps resolve the issue, it might be time to contact Apple Support for assistance. A deeper hardware issue with your AirPods could require professional attention.
How to Contact Apple Support
- Visit the official website and search for AirPods issues.
- Use the Apple Support app to chat with an expert or schedule a call.
To Conclude
If your left AirPod is not working, the cause could be as simple as a charging issue or as complex as a hardware problem. You can try several troubleshooting steps, from checking the charging case to resetting the AirPods. If all else fails, Apple Support is always available to help.
By following the steps outlined in this blog, you should be able to resolve any issues related to the left Airpod not working and enjoy your AirPods again without any hassle.
Read Also – Apple TV Remote Not Working
